Cino Fuzzyscan MBC6890 series User's Guide download pdf (Page 10)

Using MBC6890 Cordless Imager

The MBC6890 cordless imager has to establish communication with a

host system for data transmission. There are several ways for

connecting MBC6890 to the host system:

By using with the DB100 smart cradle, through one of legacy output

interfaces such as PS/2 keyboard wedge, RS232 serial interface,

USB keyboard interface and USB serial interface and so on.

By means of Bluetooth wireless communication via SPP master

service or SPP slave service.

To meet different requirements, the MBC6890 provides following two

operation modes:

Normal Mode

Under normal mode (default setting), when the radio link between the

MBC6890 and the host system is built, the MBC6890 transmits each

scanned data right after scanning the bar code. However, MBC6890

can not scan any bar code data while losing its connection with the

remote host system due to out of range. You might enable the option

of “Out-of-range Scanning” to have MBC6890 stored the scanned

data even the imager is out of range.

Batch Mode

Under batch mode, the MBC6890 can store the scanned data

without building the radio link with a remote host system.

For above-mentioned Out-of-range Scanning and Batch Mode, the

MBC6890 can store the scanned data into the buffer on a FIFO basis

until transmission is initialized or buffer memory is full. Nominally, the

imager will store up to 2,000 EAN-13 labels.

MBC6890 User’s Guide

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 53 54

No comments

Cino Fuzzyscan MBC6890 series User's Guide Page 10