Cino FuzzyScan F700 Series Technical Information download pdf (Page 5)

Operation Modes

Both F series Linear Imager and L series Laser Imager are available in

FuzzyScan family. Both series support different operation mode which are

listed below for reference.

The F series supports nine operation modes, including trigger, presentation,

alternative, level, flash, force, toggle, diagnostic and low power modes. The L

series supports five operation modes, including trigger, presentation,

alternative, level and low power modes.

Trigger Mode

When trigger mode is selected, the scanner goes into standby state after

scanning the bar code. You must press the trigger switch to turn on the light

source of the scanner before scanning the bar code.

Presentation Mode

When presentation mode is selected, the scanner will turn on the light source

and start scanning operation automatically if it detects an image similar to a

bar code. In case the scanner can’t detect a bar code, it will turn off the light

source when the preset light source on time is up.

Alternative Mode

When alternative mode is selected, the scanner keeps the light source on till

the preset light source on time is up. After the scanner turns off the light

source, you must press the trigger switch to turn on the light source again.

After each good read, the timer counter of light source on time is reset. You

do not have to press the trigger frequently, it is very convenient for multiple

scanning.

Level Mode

When level mode is selected, the scanner continues to turn on the light

source till a bar code is decoded or preset light source on time is up. When a

bar code is decoded successfully, the scanner turns off the light source

immediately. After the scanner turns off the light source, you must press the

trigger switch to turn on the light source again. If there is no scanning

operation performed during the preset light source on time, the scanner will

turn off the light source after the preset light source on time is up.

1 2 3 4 5 6 7 8 9 10 ... 15 16

No comments

Cino FuzzyScan F700 Series Technical Information Page 5