Cino FA470 User Manual download pdf (Page 35)

Command Descriptions

2-20

Store Configuration

(ALL)

Descriptions

Save current settings into flash memory permanently

Note that this command is not available for storing the following settings: the beep sequence set by

Beeping command; trigger status set by Serial Trigger command and LED status set by Indicator

command.

Packet Format

Prefix

Opcode Status

Length

Parameter(s)

LRC Suffix

7Eh

80h 03h 00h

00h 00h 00h

<Null> 83h 7Eh

1 Byte

3 Bytes 1 Byte 2 Bytes

0 Byte 1 Byte 1 Byte

. Host Requirements

If the device successfully received the above command issued by the host, a “Device ACK” will be sent

to the host right after the device performed the action. Otherwise, a “Device NAK” will be sent to host to

issue a command error. However, if the host can not receive any response from the device within the

user preset time-out duration, please resend the above command.

. Parameter(s) Field

Store Configuration command takes no parameters, so the Parameter(s) field is null.

. Length

Total size (bytes) of the Parameter(s) field

. LRC

”Opcode” XOR “Status” XOR “Length” XOR “Parameter(s)”

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 250 251

No comments

Cino FA470 User Manual Page 35