Cino FA470 User Manual Page 59
- Page / 251
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
Command Descriptions
2-44
Remote Programming
(WF)
Descriptions
Enter or exit the Programming Mode.
Wi-Fi scanner can only perform Remote Control commands when it is not in Programming mode.
Remote Programming (Enter) is used to put scanner into programming mode, so that the
subsequent programming commands will take effect. Please refer to Briefing Chapter (Page 1-2) for
detailed descriptions. Note that in programming mode the scanner can not work until the Remote
Programming (Exit) or Remote Programming Extension (Exit) is sent.
Available for F & L series
Packet Format
Prefix Opcode Status Length
Parameter(s) LRC Suffix
7Eh
80h 90h 06h
00h 00h 01h
See Below Variable
7Eh
1 Byte 3 Bytes 1 Byte 2 Bytes
1 Byte 1 Byte 1 Byte
. Host Requirements
If the device successfully received the above command issued by the host, a “Device ACK” will be sent
to the host right after the device performed the action. Otherwise, a “Device NAK” will be sent to host to
issue a command error. However, if the host can not receive any response from the device within the
user preset time-out duration, please resend the above command.
. Length
Total size (bytes) of the Parameter(s) field
. LRC
”Opcode” XOR “Status” XOR “Length” XOR “Parameter(s)”
Parameter(s)
< Table 4-7 > Remote Programming Parameter(s) Field
Parameter / PID / Size Options Descriptions
Remote Programming
PID : <Null>
Size : 00h 01h (1 Byte)
- 00h
- 01h
Exit Remote Programming
Enter Remote Programming
Serial Command
Enter Remote Programming
0x7e 0x80 0x90 0x5c 0x02 0x00 0x00 0x01 0x01 0x16 0x7e
Exit Remote Programming
0x7e 0x80 0x90 0x5c 0x02 0x00 0x00 0x01 0x00 0x17 0x7e
. Notes
0x5C 0x02: the escaped value of 0x06.
- Serial Command Manual 1
- Revision History 2
- Warranty 3
- Table of Contents 4
- Corded Series 5
- BT Scanner Series 5
- Wi-Fi Scanner Series 5
- Tether Scanner Series 6
- Scan Engine Series 6
- Fixed-mount Scanner Series 6
- Bluetooth Scanner Series 6
- WiFi Scanner Series 6
- About This Guide 7
- Chapter 1 Command Overview 8
- 1.1 Command Briefing 9
- （Continued） 10
- 1.2 Command Structure 11
- Escape Sequence 12
- Parameter Format 13
- Command Overview 14
- 2.1 Communication 17
- Get Connected MAC 17
- Reply Connected MAC 18
- Get Paired MAC 19
- Reply Paired MAC 20
- Select By MAC 21
- Deselect By MAC 22
- Select By ID 23
- Deselect By ID 24
- 2.2 Data 25
- Decode Data 25
- Transmit Record 26
- 2.3 Image 27
- Enter Capture Image Mode 27
- Exit Capture Image Mode 28
- Capture Image Ready Notify 29
- Get Capture Image Data 30
- 2.4 Action 32
- LED Indicator 32
- Beeping 33
- Serial Trigger 34
- Store Configuration 35
- Factory Default 36
- Master Default 37
- Security Check 38
- BT Operation Mode 39
- BT A Operation Mode 40
- BT Synchronize 41
- FS Test Mode 42
- FS Operation Mode 43
- FS A Operation Mode 44
- SE Operation Mode 45
- TS Operation Mode 46
- TS A Operation Mode 47
- Remote Indication 49
- Remote Message 51
- Remote Clear 54
- Remote Lock 55
- Remote Unlock 58
- Remote Programming 59
- Remote Programming Extension 60
- Sync Date Time 63
- Delete Record 64
- Send STerm Data 65
- 2.5 Interface 66
- Set RS232 72
- Get RS232 74
- Reply RS232 76
- Set Bluetooth 90
- Get Bluetooth 93
- Reply Bluetooth 95
- Set USB HID 98
- Get USB HID 100
- Parameter(s) 101
- Reply USB HID 102
- Set USB COM 104
- Get USB COM 106
- Reply USB COM 108
- Set Wi-Fi 110
- Get Wi-Fi 112
- Reply Wi-Fi 114
- 2.6 Operation 116
- Set TS Operation 116
- . Notes 118
- Get TS Operation 122
- Reply TS Operation 124
- Set SE Operation 130
- Command Descriptions 133
- Get SE Operation 134
- Reply SE Operation 136
- Set FS Operation 140
- Get FS Operation 145
- Reply FS Operation 147
- Set BT Operation 152
- . Warning 154
- Get BT Operation 158
- Reply BT Operation 160
- Set WF Operation 166
- Get WF Operation 169
- Reply WF Operation 171
- Set WF System 174
- Get WF System 176
- Reply WF System 178
- Set WF Scanning 180
- Get WF Scanning 183
- Reply WF Scanning 185
- 2.7 Transmission 188
- Set Transmission 188
- Get Transmission 191
- Reply Transmission 193
- 2.8 Symbology 204
- Set Symbology 204
- Get Symbology 217
- Reply Symbology 221
- 2.9 Device Info 234
- Get Device Info 234
- Reply Device Info 236
- Get Record Count 238
- Reply Record Count 239
- 2.10 Acknowledgement 240
- Device ACK 240
- Device NAK 241
- Host ACK 242
- Host NAK 243
- Host ACK Extension 244
- Host NAK Extension 247
- Chapter 3 Customer Support 250
- CINO GROUP 251
- PC WORTH INT’L CO., LTD 251
Related products and manuals for Scanners Cino FA470
Scanners Cino L780BT HC User Manual
(16 pages)
(16 pages)
Scanners Cino PL680BT HC User Manual
(113 pages)
(113 pages)
Scanners Cino PL680BT HC User Manual
(9 pages)
(9 pages)
Scanners Cino PL680BT HC User Manual
(12 pages)
(12 pages)
Scanners Cino L780BT HC User Manual
(16 pages)
(16 pages)
Scanners Cino L780BT HC User Manual
(87 pages)
(87 pages)
Scanners Cino L780BT HC User Manual
(8 pages)
(8 pages)
Scanners Cino L780WD User Manual
(16 pages)
(16 pages)
Scanners Cino L780WD User Manual
(17 pages)
(17 pages)
Scanners Cino PL680BT HC User Manual
(16 pages)
(16 pages)
Scanners Cino FA470 User Manual
(16 pages)
(16 pages)
Scanners Cino FA470 User Manual
(92 pages)
(92 pages)
© 2020, manymanuals.com. All rights reserved. | 2.514 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals